PRIMER FOR CELLULOSIC PAINTS (SILK MATTE)

PRIMER FOR CELLULOSIC PAINTS (SILK MATTE)

DEFINITION
Matte primer for alkyd and nitrocellulose based, one component, cellulosic paints.

PLACE OF USE
It is suitable for use on wooden, sheet metal and polyester surfaces for internal use.

ADVANTAGES
• Serial drying,
• Easy to sand.

NOTE
Drying times are the times that can be obtained when applied in a way that leaves a dry film thickness of 40 microns in one coat under normal conditions. It should be known that the drying time will increase as the application thickness increases and in cold weather.

APPLICATION INFORMATION

Surface Preparation
The application surface must be clean and solid. Surfaces primed with a suitable primer should be cleaned of dust after sanding.

Ambient conditions
Ambient temperature should be between +5°C and +35°C. In applications to be carried out in closed environments, ventilation should be considered.

Preparation of the Mixture
Care should be taken to ensure that the paint to be thinned is at a minimum of 15°C. It should be brought to the application viscosity with the addition of Green Lack Cellulosic Thinner, and a homogeneous mixture should be provided by using a mechanical mixer if necessary.

Application to the Surface
The mixture, which is made ready for application, should be applied in two or three cross coats by air spraying, waiting for 20-30 minutes between coats depending on the desired surface fullness. If necessary, paste-polishing can be done after 1 day.

Cleaning of Equipment
With cellulosic thinner.

PACKING INFORMATION
There is a net 13 kg in a bucket and a net 2.5 kg in a gallon.

STORAGE INFORMATION
The material should be stored in a cool and dry place. The life of the material is 1 year when stored properly and in its unopened original packaging.

HEALTH/SAFETY INFORMATION
Comply with the Safety Data Sheet (SDS) prepared in accordance with the EU directives regarding the product.