POLYURETHANE TOP COAT SILK MATTE PAINT (4+1)

POLYURETHANE TOP COAT SILK MATTE PAINT (4+1)

DEFINITION
It is an alkyd polyurethane resin-based, two-component, silk-matte top coat furniture paint.

PLACE OF USE
It is used as a top coat paint on all kinds of solid and veneered wooden surfaces for interior use in the furniture and decoration industry.

ADVANTAGES

• It has high filling power,

• Resistant to household chemicals, fruit juices and alcoholic beverages.

NOTE
Drying times are the times that can be obtained when applied in a way that leaves a dry film thickness of 40 microns in one coat under normal conditions. It should be known that the drying time will increase as the application thickness increases and in cold weather.

APPLICATION INFORMATION

Surface Preparation
The application surface must be clean and solid. Wooden surfaces should be cleaned of dust after appropriate sanding.

Ambient conditions
Ambient temperature should be between +5°C and +35°C. In applications to be carried out in closed environments, ventilation should be considered.

Preparation of the Mixture
It is a two-component product and should be prepared in the specified mixture ratio, considering the pot life, as much as the amount to be consumed. In order to obtain a homogeneous mixture, the product temperature should not be less than 15°C. Component A should be mixed in itself, and hardener (component B) should be added by paying attention to the mixing ratio. A and B components should be mixed until homogeneous. Application to the Surface: The mixture, which is prepared for application, is applied by air spraying in two or three cross coats depending on the desired surface fullness. It is left to cure in a dust-free environment.

Cleaning of Equipment
With polyurethane thinner.

PACKING INFORMATION
A set of 15 kg 18001 POLYURETHANE PAINT MAT; It consists of component A with product code 18001, net 12 kg in a bucket, and component B with product code 18001, net 3 kg in a gallon.

STORAGE INFORMATION
A set of 15 kg 18101 POLYURETHANE PAINT SILK MAT; It consists of 12 kg net product code 18101 component A in a bucket and 3 kg net 18101 product code B component in a gallon.

HEALTH/SAFETY INFORMATION
The material should be stored in a cool and dry place. When stored properly and in its unopened original packaging, the life of the material is 1 year for component A and 6 months for component B.