INNOPUR STONE PRIMER PU-1K

DEFINITION
INNOPUR STONE PU PRIMER -1K is a polyurethane-based, solvent-based, one-component surface primer for stone carpet coatings that increases adhesion in pouring type systems.

PRODUCT ADVANTAGES
-Prevents dusting after application.
- Eliminates adhesion problems (reaction deterioration) caused by the ground.
-It has high bonding and holding strength.
- Resistant to water, humidity and heat after application.
-It is very easy to apply.
-+5 / +30 °C can be applied.

SCOPE OF APPLICATION
It is a polyurethane-based floor primer used indoors and outdoors, before the stone carpet application, to prevent the floor from dusting, to increase adherence and to cut moisture.

APPLICATION
The surface on which the primer will be applied should be clean, free from oil and dirt, especially dry and repaired. INNOPUR PRIMER is applied to the floor with the help of a brush or roller. Under normal conditions, the curing and drying time is 4-6 hours. In hot environments, the time is shorter, and in cold environments, this time may be longer. After the primer application has dried, the mixture of INNOPUR STONE UV RESIN + STONE is applied to the floor.

To mix up
It is ready to use. It can be applied without thinning. Special solvent can be used when necessary.

CONSUMPTION
Minimum total consumption: 0.1-0.3 kg/m2

PACKAGING
200 kg steel drum, 15 Kg metal bucket