INNOPUR STONE EP RESIN-2K

DEFINITION
INNOPUR STONE UV RESIN EP-2K is a two-component, epoxy-based liquid product containing 100% solids. It forms a very durable and hard but elastic film that reacts as a reaction. It has excellent UV resistance and high hydrophobic property.

The product is used for multiple purposes.

-As a coating on tiles such as marble, ceramic,
-Natural stones as binders,
-As a bright floor on the balconies,

It can also be used for concrete waterproofing. It can be applied in thick layers, it does not bubble.
The usage rate is 6%. It has high wetting properties and cross-linking properties. It provides fast drying in cold weather, even on damp concrete.

usage areas
-Parking areas / Walking paths
-Bike lanes / Public parks
-Office buildings / Landscape plans
-Schools / Tree pits
-Garden design / Swimming pool surroundings
-Disabled access ramps
- Roof terraces and balconies

It can be used easily in similar areas.

METHOD OF APPLICATION
Surface preparation
The surface should be cleaned using pressurized water if possible; oil, grease, fuel and paraffin wastes should be removed, as well as completely free from mold release agents, cement residues and sawdust. Surface defects and cracks should be filled with suitable products and repaired.

Lining
Regardless of the surface condition (porous or non-porous), it must be used as a primer (INNOPUR PRIMER PU 100-1K or INNOPUR PRIMER EP-100).

Binder resin application
After the primer layer has dried, the pebble granules, which is the first stage of the application, will be mixed with the help of a concrete mortar mixer or mixer for 10 minutes by adding 6% polymer-based, two-component stone-binding polymer resin.

FLOOR COATING APPLICATION

FOR HORIZONTAL SURFACES
In order to obtain 8 mm thickness from stone granules with a thickness of 2-4 mm or 4-7 mm, an average of 13 kg of pebble granules per square meter and 0.800 kg of polymer-based stone binder resin should be used.
(Stone granule sizes can be used in desired dimensions)

The mixture is laid on the ground by compacting it with a vibration machine or trowel as if pouring asphalt.

Consumption
-100 Kg of pebbles
-6 Kg INNOPUR STONE UV RESIN EP-2K

FOR VERTICAL SURFACES
In order to obtain 5-6 mm thickness from 2-4 mm or 4-7 mm thick stone granules, an average of 8 kg pebble granules and 0.420 kg polymer-based stone binder resin should be used per square meter. Thickening powder must be entered in order for it to gain consistency and hang on the wall.

(Stone granule sizes can be used in desired dimensions)

Consumption
-100 Kg of pebbles
-6 Kg INNOPUR STONE UV RESIN EP-2K
-1Kg Thickening powder.

PACKAGING
A. component: 10 Kg
B. component: 5 kg metal packages

SHELF LIFE
12 months in unopened, airtight packaging