INNOPUR SPORT PU ADHESIVE MULTI-2K

INNOPUR SPORT PU ADHESIVE MULTI-2K

DEFINITION
INNOPUR SPORT PU MULTI ADHESIVE is a two-component, polyurethane-based, multi-purpose special floor adhesive. Cures at room temperature.

PLACE OF USE
✓ Bonding of latex, polyurethane and rubber-based carpets,
✓ Bonding rubber floor coverings to concrete, metal and asphalt indoors and outdoors,
✓ Attaching prefabricated light walls made using polyurethane, wooden boards, cork and metallic foils,
✓ Bonding of sandwich panels made of ferrous and non-ferrous metals to wood; It is used for bonding tiles and panels made of cork or SBR, which provide sound insulation, on wet floors such as bathrooms and kitchens in buildings.

ADVANTAGES
✓ Can be applied easily with a notched trowel
✓ Resistant to moisture and weather conditions
✓ It hardens fast. Surfaces become suitable for pedestrian traffic in a short time

APPLICATION
Surface Preparation: The surface should be dry and clean. There should be no oil, wax, grease, water repellants, dust, unattached free parts on the surface. The humidity should be maximum 8%.

New Concrete
Concrete must be at least 28 days old and must not have any curing material on its surface.

Old Concrete
There should be no easily removable parts on the surface and no sanding or dusting.

Metal
The surface must be clean

Lining
Concrete, asphalt, metal surfaces are primed with our single or two-component PU-based primer. Primer application can be done with a brush or roller. Primer consumption is 150-400 gr/m² depending on surface smoothness, strength and absorbency. Minimum 3 hours after primer application. Wait for a maximum of 12 hours and then the adhesive is applied to the surface.

To mix up
A mechanical mixer with 100-200 cycles is used for mixing. Maximum care is taken to prevent air from entering the adhesive during mixing. All of Component B (Hardener) is poured into component A. Mixing time should be at least 5 minutes. To ensure a homogeneous mixture, use a spatula on the side walls and bottom of the container It may be necessary to scrape it off with a paste. It is very important to mix the two components homogeneously for the adhesive performance. Another sign that the mixture is well mixed is that the color is homogeneous.

Usage Period of the Mixture
When the A and B Components of INNOPUR SPORT PU MULTI ADHESIVE are mixed, the reaction heats up because it is exothermic. Especially on hot days, when INNOPUR SPORT PU ADHESIVE full package is mixed, it is recommended to spread the mixture by pouring the entire mixture on the floor. The mixture should be used within 45-60 minutes, depending on the air temperature. At low temperatures, the service life of the mixture will be extended, and at high temperatures, the service life of the mixture will be shortened.

APPLICATION TOOLS and APPLICATION
INNOPUR SPORT PU MULTI ADHESIVE is applied with a notched trowel. Trowel selection and consumption depend on the structure of the surfaces to be bonded. Consumption may vary between 500-2000 gr/m². Applying a moving or constant pressure on the bonded surfaces is important for the performance of the adhesive. If pressure is applied, all of the surfaces to be adhered will come into contact with the adhesive and will be transferred to the surfaces homogeneously.

CLEANING
Excess adhesive and tool cleaning can be done with Thinner while the adhesive is wet. Hardened adhesive can only be cleaned mechanically.

SHELF LIFE
For Components A and B, it is 1 year in their original unopened packages and at storage temperatures of 10-25 ºC. Protect Components A and B from direct sunlight and moisture.

PACKAGING
18+2 : 20 Kg
21+3 : 24 Kg
23+2 : 25 Kg

Plastic or metal packaging