INNOPUR COURT FLOOR PU PRIMER-1K

INNOPUR COURT FLOOR PU PRIMER-1K

DEFINITION
INNOPUR PRIMER PU 150-1K is a one-component, low-viscosity, polyurethane-based primer. It can be applied to many different types of substrates. The outstanding feature of the product is that it has a very low viscosity and stabilizes the curing speed. In this way, it perfectly covers and impregnates almost all kinds of surfaces, whether porous (regardless of the pore state) or non-porous (glass, metal, etc.), integrally/continuously and homogeneously. Even if the removal of the main floor is delayed, it is not a problem. It can also be applied on dry, wet or even fresh concrete as a low-cost effective waterproofing material that increases the durability of the substrate. The cured film has superior mechanical properties. The elongation is >300% and the tensile strength is well above 30 N/mm2. It is applied with a brush or roller with a consumption of 100- 200gr/m2, depending on the pore state of the substrate.

SCOPE OF APPLICATION

Application areas as a primer
- Concrete structures (moist, wet or wet concrete)
- Ceramic tiles
- Non-porous substrates such as glass, marble and metal.
- It can also be used as a concrete waterproofing material.

LIMITATIONS
Color fades when used in sun-exposed areas. But this is purely a visual change, its performance is not affected in any way.

FEATURES and ADVANTAGES
- It is single component.
- It has low viscosity.
- It can be easily applied to any surface, including wet/wet concrete.
- It adheres strongly even to glassy, ​​non-porous substrates.
- It perfectly covers and impregnates the surface as a whole/uninterrupted and homogeneous.
- Even if the laying of the main floor is delayed, it does not cause a problem.
- It is elastic.
- Offers a low-cost solution for concrete sealing and protection.

APPLICATION
The surface should be cleaned using a high pressure washer if possible; Oil, grease, fuel and paraffin residues should be removed, as well as completely free from mold release agents, cement residues, chips, loose particles and cured membranes. For surface imperfections, it is recommended to use INNOPUR PRIMER PU 150 treated with sand. Apply with brush or roller.

CLEANING
After cleaning tools and equipment with paper towels, wipe with SOLVENT. PACKAGING: 20 lt, 5 lt.

SHELF LIFE
It can be stored for a minimum of 12 months in unopened original buckets, in dry environments at temperatures between 5°C and 25°C. The material in the opened bucket should be used as soon as possible.