Primers

SURFACE PRIMERS

INNOPUR PRIMEREP AQUA-2K

Water based epoxy primer is a solvent-free, water dispersed two component primer based on epoxy resin used to promote adhesion on new concrete, cementitious screeds, hardened concrete, existing floor coatings

More information ...

INNOPUR PRIMER EP UNIVERSAL-2K

Two component, mild chromate free epoxy primer for refinishing cars, chassis and also light commercial vehicles.Gives good chemical and corrosion resistance and is very mild for soft substrates such as powder slurries.

PACKAGING : 12+6 Kg.

More information ...

INNOPUR PRIMER PU 100-1K

One component low viscosity polyurethane fluid that cures with the humidity in the atmosphere. It is especially designed to enhance the adhesion of polyurethane high solids products on porous substrates.

PACKAGING : 7 Kg.

More information ...

INNOPUR PRIMER PU UNIVERSAL-2K

Two-component, solvent-free primer . Polyurethane  based products have been developed for . Cured in a short time and does not contain toxic substances (zero VOC / Volatile Organic Compounds). For polyurethane- based products it is designed specially ,in order to improve adhesion on the surfaces of the moist or wet concrete.

PACKAGING : 9+6 Kg.

More information ...

INNOPUR PRIMER PU CRYSTAL-1K

One component, colorless, non-staining primer especially designed to secure the adhesion of on non-porous substrates. Although designed for INNOPUR FLOOR CRYSTAL, it is fully suited for all products in the INNOPUR SHIELD product range. Chemically is a composed of a moisture reacting organosilane in a mixture of solvents and additives.

PACKAGING : 7 Kg.

More information ...

INNOPUR PRIMER PU MICRO-1K

One component, low viscosity,100% aliphatic polyurethane based primer suitable for all substrates. It is characterised by its very low viscosity, excellent impregnation, non-yellowing (non- staining) properties combined with a relatively fast cure speed and most importantly its excellent adhesion on both non-porous and porous substrates.

PACKAGING : 7 Kg.

More information ...

INNOPUR MICRO SEALER PU 150-1K

One component, low viscosity, polyurethane based primer suitable for many different substrates. It is characterised by its very low viscosity and balanced curing speed which result in excellent wetting, impregnation and paint-over time on different substrates, whether of high, low or no porosity (e.g. glass and metals)

PACKAGING : 7 Kg.

More information ...

INNOPUR MICRO SEALER PU 200-1K

One component, 100% solvent free, polyurethane based primer suitable for all substrates. It is characterised by its very low viscosity and balanced curing speed which result in excellent wetting, impregnation and paint-over time on all substrates, whether of high, low or no porosity (e.g. glass and metals).
unique formulation )

PACKAGING : 7 Kg.

More information ...

INNOPUR PRIMER PU W-1K

One component, colorless, non-staining primer especially designed to secure the adhesion of Innopur shield crystal on non-porous substrates. Although designed for Innopur shield crystal, it is fully suited for all products in the Innopur shield product range. Easily applied by wetting a clean cloth  and essentially cleaning.

PACKAGING : 7 Kg.

More information ...
%d blogcu bunu beğendi: